New Revised Plans! CreativeRCutah, scratch built rc jet. Easily draw designs onto the foam board with a pencil, erase as needed, then use a permanent marker to draw it onto your jet! #creativercutah #scratchbuiltrcjet #f22raptor.
- The F-22 is a mid-mounted pusher model intended to be flown with tailerons only, but it can easily be equipped with ailerons and rudders. Build it from the plans attached below. The dimensions of the slots and tabs are made for 6 mm depron.
- There are quite a few easy-to-build free plans available at this popular site, including fun foamies like the F-22 Raptor and the Bugatti 100 P. The site is easy to navigate and the plans are free to download, but you do need to sign up to access photos and full plans and descriptions.
- F-22 Raptor
Designed by Steve Shumate
If you download plans and build the F-22, please consider sending the designer a donation for all of his hard work and inspiration!! PayPal welcomed!
PayPal | jetset44@gmail.com
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
Note this design is quite a bit more complex than my other park jet designs, due mostly to the complex geometry of the real F/A-22. It requires a LOT of heat forming foam as well as making a lot of bevel cuts and aligning parts at odd angles. If you haven’t built a park jet before, this is NOT the model to start with! It will be a challenging build. But if you’ve built other park jets it shouldn’t be too difficult.
F 22 Raptor Rc Plane Pdf Plans Free
SPECIFICATIONS
Wing area: 248 sq in | Span: 26.0' | Length: 36.3' | Weight RTF: 16 to 18 oz (estimate) | Wing loading: 10.5 oz/ft2 | Motor: Littlescreamers Park Jet Special (LSPJ) | Battery: Thunder Power 1320 mAh 11.1V Prolite | Prop: APC 7x4 (for aerobatics) or 6x5.5 (for speed) | Current: 15 amps | Watts: 150 watts | Power loading: 140 to 150 watts/lb | Flight controls: Stabilator, flaperons, rudder (optional), thrust vectoring (optional)
BUILD THREAD
Designed by Steve Shumate
If you download plans and build the F-22, please consider sending the designer a donation for all of his hard work and inspiration!! PayPal welcomed!
PayPal | jetset44@gmail.com
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
Note this design is quite a bit more complex than my other park jet designs, due mostly to the complex geometry of the real F/A-22. It requires a LOT of heat forming foam as well as making a lot of bevel cuts and aligning parts at odd angles. If you haven’t built a park jet before, this is NOT the model to start with! It will be a challenging build. But if you’ve built other park jets it shouldn’t be too difficult.
SPECIFICATIONS
Wing area: 248 sq in | Span: 26.0' | Length: 36.3' | Weight RTF: 16 to 18 oz (estimate) | Wing loading: 10.5 oz/ft2 | Motor: Littlescreamers Park Jet Special (LSPJ) | Battery: Thunder Power 1320 mAh 11.1V Prolite | Prop: APC 7x4 (for aerobatics) or 6x5.5 (for speed) | Current: 15 amps | Watts: 150 watts | Power loading: 140 to 150 watts/lb | Flight controls: Stabilator, flaperons, rudder (optional), thrust vectoring (optional)
BUILD THREAD
F22 Rc Plane
Demonstration of the F-22's thrust vectoring capabilities.','source':'Demonstration of the F-22's thrust vectoring capabilities.
'},'hSize':null,'floatDir':null,'html':'','url':'http://www.youtube.com/watch?v=b10X7zagCmA','width':640,'height':480,'providerName':'YouTube','thumbnailUrl':'https://i.ytimg.com/vi/b10X7zagCmA/hqdefault.jpg','resolvedBy':'youtube'}'>A second video sent in by a customer. He scratch built his, but the custom formed canopy is from 6mmFlyRC','source':'A second video sent in by a customer. He scratch built his, but the custom formed canopy is from 6mmFlyRC
'},'hSize':null,'floatDir':null,'html':'','url':'http://www.youtube.com/watch?v=EWCthtDZ4So','width':640,'height':480,'providerName':'YouTube','thumbnailUrl':'https://i.ytimg.com/vi/EWCthtDZ4So/hqdefault.jpg','resolvedBy':'youtube'}'>